Oregon Scientific STARCK PS-S01U - Manual (Page 8)

7
EN
RECEPTION
Reception takes 2 – 10 minutes to complete. Once
complete, the icon will stop blinking.
NOTE For best results, place the unit away from metal or
electrical objects, and near a window with a clear view to
the sky.
Strong signal Weak signal No signal
TO DISABLE OR ENABLE
AUTO-SYNCHRONIZATION
In Clock mode, press DOWN for 2 seconds to disable the
auto-synchronization. The unit will not respond to radio
signals until you reactivate the synchronization.
To enable auto-reception, press UP for 2 seconds.
SET OR CHANGE THE CLOCK
1.
Press SELECT to switch to the Clock Mode. The
time will flash.
2. Press and hold SELECT for 2 seconds to enter the
setting mode.
3. Select the 12/24-hour format, hour, and minute.
Press UP or DOWN to change the setting. Press
SELECT to confirm.