Oki 6E User Manual
Page 192
C - 6
(j)
Standard tray paper feed setting
•
Do no change its default setting since this is a factory setting and were set at the
factory.
(k) Second tray paper feed setting
•
Do no change its default setting since this is a factory setting and were set at the
factory.
(l)
Second tray download table selection
•
Do not change its default setting since this is a factory setting and were set at the
factory.
(m) Multi-purpose feeder setting
•
Do not change its default setting since this is a factory setting and were set at the
factory.
(n) Multi-purpose feeder download table selection
•
Do not change its default setting since this is a factory setting and were set at the
factory.
(o) Setting of standby temperature
(p) Engine test selection
•
Do not change its default setting since this is a factory setting and were set at the
factory.
(q) Engine reset
•
All EEPROM areas used by the engine block are reset to the factory default values.
The following items are excluded.
•
Menu level-1
•
Menu level-2
•
Operator panel menu disable/enable
•
Head drive time setting
•
Head width setting
•
Head type setting
•
Transfer current setting
•
Page print disable/enable
•
Transition to the operation mode occurs completion of resetting.