Optiview G0521 - Manual (Page 33)

DVR Server Manual ver.5.05/rel.092507
29
2.3 Sensor setup
2.3.1 Sensor setup
【Select Sensor】Select the sensor from the drop-down list in order to set the parameters for it.
【Sensor】 Select this sensor port to use or not.
【Sensor Position】Enter the description of your sensor location for easy identification.
【Speed Dome Preset】 Select linkage of Speed Dome preset number . Speed Dome will
move to this preset number automatically when there is an alarm. (Speed Dome installation
needed).
【Alarm Play sound】 Select a sound of (.wav file) for a sensor, if there is an alarm, the sound
file will play.
【Tied to Cameras】Select camera that is related to this sensor alarm.
2.3.2 Group setup
Sensor group setup is very similar to the group setup of camera recording.
【Selected Group】Select group number.
【Sensor Type】Select NC or NO alarm type.
【Alarm Write log】Select write alarm log or not.