Olympus WS 700M - Manual (Page 26)

2
26
EN
Recording
R
e
cording
• [
•] will appear on the display.
• When operating in [Recorder] mode, the
last file recorded using the microphone
will be play back.
• When operating in [FM Radio] mode,
the recorder will automatically enter
[Recorder] mode, and the last file
recorded from the FM radio will play
back.
Pause
While the recorder is during
recording mode, press the REC (
s)
button.
• [
≠] will appear on the display.
• The recorder will time out after 60
minutes when left in [Rec Pause].
Resume Recording:
Press the REC (
s) button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during recording
mode, press the
OK
`/MENU
button.
Settings relating to Recording
[Mic Sense]
(
☞ P.47, P.49)
Sets the recording sensitivity.
[Rec Mode] *1
(
☞ P.47, P.49)
Sets the recording rate for
each recording format.
[Zoom Mic] *2
(
☞ P.47, P.50)
Sets the directivity of the
builtin stereo microphone
[Low Cut Filter]
(
☞ P.47, P.50)
This function can reduce
noise from air conditioners,
projectors and other similar
noises.
[VCVA]
(
☞ P.47, P.50)
Sets the threshold level for
the Variable Control Voice
Actuator (VCVA).
[V-Sync. Rec]
(
☞ P.47, P.51)
Sets the start level for voice
sync recording.
[Rec Scene]
(
☞ P.47, P.52)
Sets the recording settings
which matches the recording
condition or environment.
*1 For WS-710M (In [FM Radio] mode, the
only setting of the [Rec Mode] settings
you can change is the recording fi le
format).
*2 For WS-710M only.
For WS-710M, WS-700M only:
• We recommend formatting the record
media in the recorder before recording
(
☞ P.63).
• When a microSD card is inserted in the
recorder, be sure to confi rm the recording
media as either [Built-in Memory]
or [microSD Card] so that there is no
mistake (
☞ P.47, P.57).
• If the REC (
s) button is pressed when a
function other than the record function
is specifi ed, [Cannot record in this
folder] is displayed. Select a folder from
[Folder A] through [Folder E] and start
recording again.