Menu setting method – Olympus WS 700M User Manual

Page 64

Advertising
background image

64

5

EN

Menu setting method

Menu setting method

Notes

• Never format the recorder from a PC.
• Once the recorder is formatted, the music

fi les with DRM may not be transferred to
the recorder again.

• When the recorder is formatted, all the

saved data, including locked fi les and
read-only fi les, are erased.

• After formatting, recorded voice fi le

names may start from [0001].

• When returning the settings for the

functions to their initial settings, use
[Reset Settings] (

☞ P.47, P.57).

7

Press

the

OK

`/MENU button.

• Formatting begins and [Format !]

flashes on the display.

• [Format Done] appears when

formatting ends.

For WS-710M, WS-700M only:
• When an microSD card is inserted in the

recorder, be sure to confi rm the recording
media as either [Built-in Memory]
or [microSD Card] so that there is no
mistake (

☞ P.47, P.57).

• It may take over 10 seconds to complete

processing. Never perform operations
such as the following while processing, as
they may damage the data. In addition,
replace the battery with a new one in
order to ensure that the battery will not
run out while processing.
1 Disconnecting the AC Adapter while

processing.

2 Removing the battery while

processing.

3 Remove the microSD card during

processing when [microSD Card] is
being used as the recording media.

• Formatting on the recorder will be

Quick Format. If you format the microSD
card, information of fi le management
is refreshed and the data inside the
microSD card is not deleted completely.
When handing over and disposing the
microSD card, be careful about the
data leakage from the microSD card.
We recommend the microSD card to be
destroyed when you dispose the microSD
card (

☞ P.19).

For WS-600S only:
• It may take over 10 seconds to complete

processing. Never perform operations
such as the following while processing, as
they may damage the data. In addition,
replace the battery with a new one in
order to ensure that the battery will not
run out while processing.
1 Disconnecting the AC Adapter while

processing.

2 Removing the battery while

processing.

Advertising
This manual is related to the following products: