Oricom ECO3400 - Manual (Page 13)

Getting Started
13
Adjusting the earpiece volume
1. Press or to adjust the volume during a call. Press to confirm.
Muting the microphone
The mute feature allows you to speak to someone in the house privately.
1. Press during a call. The caller cannot hear you, but you can still hear the caller’s
voice.
2. Press again to un-mute the microphone. You can now communicate with the
caller.
Using the handset speaker phone
The speakerphone lets you talk on the phone without holding onto the handset.
1. Press during a call to turn the speaker on. Press again to turn it off.
MISSING HANDSET(S)
1. Press on the base unit. All the handsets connected to this base unit ring.
2. Press on the base unit again to stop paging. All the handsets stop ringing OR
Press any key on the handset to stop the paging.
Caller ID
IF YOU SUBSCRIBE TO YOUR SERVICE PROVIDERS CALLER ID SERVICE WHEN THE PHONE RINGS
AND CALLER INFORMATION IS RECEIVED, THE DISPLAY WILL SHOW THE FIRST 12 DIGITS OF
THE CALLERS NUMBER. IF THERE IS AN IDENTICAL PHONE NUMBER STORED IN THE
PHONEBOOK, THAT PHONEBOOK NAME WILL BE DISPLAYED INSTEAD OF THE CALLER’S
NUMBER. YOUR PHONE AUTOMATICALLY STORES THE LAST 20 INCOMING CALLS
INFORMATION. EACH RECORD HOLDS UP TO 20 DIGITS.
CALL WAITING
You can use the recall button to answer a second call while you are on the phone. However this service
will need to be turned on. For example to turn on Telstra’s Call Waiting service:
1. Press wait for dial tone then Press 43
2. You will hear a service tone then Press.
Take two different calls at the same time
If you have subscribed to your telephone network operators Call Waiting Caller ID service, your phone
will display the number of the second incoming call for around 20 seconds while you are talking on
the phone.
During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you
wish to answer this call:
1. When the handset receives a second call, the number of the caller appears on the display. It
will display for 20 seconds or until you press a key on the phone. Press listen for dial
tone then Press 2 to put the current call on hold and talk with the second caller.
2. Subsequent presses of listen for dial tone then Press 2 will toggle you between these 2
callers.