Operating the phc-5 system, 1 turn on the power to the tv, 2 adjust the volume level – Onkyo PHC-5 User Manual

Page 11: Compatible recordings and media, Using the virtual surround system for tv sound, Turn on the power to the tv, Adjust the volume level, Continued to the next page)

Advertising
background image

11

Operating the PHC-5 System

Compatible recordings and media

The Virtual Surround system on the PHC-5 system produces the best effect with recordings (media) that use the “Dolby*
Surround” system. These media include Hi-Fi VHS, laser discs, and DVD video, which carry the

mark. The

Virtual Surround system also produces a great effect with normal stereo recordings, although some of them may seem to
have a narrower stereo image or produce unnatural sound. In this case, use Stereo mode.

Some stereo recordings use special recording techniques or special processing, such as virtual processing. The Virtual Surround
system may sometimes over-enhance or reduce the effect too greatly with these recordings. In this case, use Stereo mode.

The Virtual Surround system produces no effect with monaural recordings.

*Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Using the Virtual Surround system for TV sound

(Continued to the next page)

Lower the TV volume level to minimum and turn on the power to the PHC-5

1

Turn on the power to the TV.

About three seconds after the TV sends out the audio signal, the power is
turned on to the PHC-5 (IPM function), and the STANDBY/ON indicator
turns off. The “TV” indicator in the “TV/VIDEO/AUX” section lights up.

To listen to the audio of a device connected to the VIDEO/AUX
jack, press the STANDBY/ON button on the unit or the POWER
button on the remote controller, then press the INPUT button on
the unit or the INPUT SELECTOR button on the remote con-
troller to turn the “VIDEO” or “AUX” indicator on.

2

Adjust the volume level.

When you operate one of the VOLUME buttons (either on the unit or on the
remote controller), the LEVEL meter lights up, indicating the current level.
The LEVEL meter turns off five seconds after you release the button.

DOLBY SURROUND

P R O • L O G I C

SENDING/

LEARNED

POWER

POWER

TV/VCR

POWER

TV/VIDEO

DISTANCE

EXPAND

MODE

TV

SURROUND

FRONT BALANCE

VIDEO

INPUT SELECTOR

VOLUME

AUX

SUB

MUTING

VOLUME

TV CONTROL

VIDEO CONTROL

CH

DISPLAY

LEARN

REMOTE CONTROLLER

RC-382M

INPUT

AUX

VIDEO

TV

MID

NEAR

DISTANCE

NORMAL

WIDE

PANORAMA

TIP

PHC-5

INPUT

VOLUME

LEVEL

MAX

MIN

π

: Raise the volume level.

: Lower the volume level.

VOLUME

Light up

PHC-5

Advertising