Connections (continued), Connecting to video/aux input jacks – Onkyo PHC-5 User Manual

Page 8

Advertising
background image

8

Connections (continued)

Connecting the subwoofer, SKW-320, SKW-310, etc.

Connect the subwoofer Optional Onkyo subwoofer SKW-320, SKW-310, etc. to the SUBWOOFER PREOUT jack on the PHC-5.

•

You can connect any subwoofer with a crossover frequency between 100Hz and 200Hz. Place the subwoofer in the optimum position.

•

The location of the subwoofer significantly changes the effects. In most cases, place it in the corner of the room to get the best results.

•

Refer to the instruction manual that came with the subwoofer for more information.

Connecting to VIDEO/AUX INPUT jacks

Use the VIDEO or AUX input jacks for connection in the following cases:

–

To connect another audio or video device.
Lower the volume level on the PHC-5 before you change an input source using the INPUT SELECTOR, since the input
level of a device such as CD player connected to the VIDEO or AUX input jacks may be different from the input level of the
TV and selecting a different input source may produce a loud sound.

–

To connect your VCR directly to the PHC-5, since your TV does not have audio output jacks.

–

To connect your VCR directly to the PHC-5, since your TV has “variable” audio output jacks. (Refer to the “CAUTION” on
page 7.)

–

To connect your VCR directly to the PHC-5, since your TV outputs audio signals during programmed recording on the VCR
even if the power to the TV is turned off. (Refer to the “CAUTION” on page 7.)

•

Use the cable included in the device for connection. Connect the stereo audio connection cable as follows:

•

Plug the cables securely. Incomplete connection may cause noise or malfunction.

•

Refer to the manual for your AV device for more information on AV output connections.

PHC-5

VOLUME

INPUT

AUX

VIDEO

TV

LEVEL

MAX

MIN

FAR

MID

NEAR

DISTANCE

NORMAL

STANDBY/ON

POWER

OFF

ON

Therter-Dimensional

WIDE

PANORAMA

S U R R O U N D

V I R T U A L

LINE INPUT

L

R

PHC-5

: Signal flow

Included

We recommend you connect a subwoofer to take the best advantage of the virtual
surround effects.

Subwoofer with built-in

(SKW-320,

SKW-310, etc.)

amplifier (active)

Monaural audio connection cable

•

You may connect the cable to either L or R
input, if applicable.

TIP

To the audio output L ch. jack of the device...white

To the audio output R ch. jack of the device...red

white...PHC-5’s AUX or VIDEO input L ch. jack

red...PHC-5’s AUX or VIDEO input R ch. jack

PHC-5

VOLUME

INPUT

AUX

VIDEO

TV

LEVEL

MAX

MIN

FAR

MID

NEAR

DISTANCE

NORMAL

STANDBY/ON

POWER

OFF

ON

Therter-Dimensional

WIDE

PANORAMA

S U R R O U N D

V I R T U A L

Audio Output

Audio Output

L

R

L

R

: Signal flow

PHC-5

CD player, MD player etc.

VCR, LD player or DVD player etc.

Advertising