One for All URC 6800 User Manual
Page 11
Toshiba DBS
0790
Uniden DBS
0724, 0722
Zenith
0856
SEARCHING FOR YOUR CODE
If your TV, VCR or Cable Converter does not respond to the
Cinema 6+ after trying all of the codes listed for your brand, or
if your brand is not listed at all, try searching for your code. For
example, after trying all of the codes for your TV, you still can-
not get the Cinema 6+ to operate your TV, then:
1.
Turn on your TV.
2.
Press TV and release. Press and hold SETUP until the
Cinema 6+’s red light blinks twice, then release
SETUP.
3.
Press 9 - 9 - 1.
4.
Slowly alternate between pressing POWER* and TV
until your TV turns OFF. Make sure that the Cinema
6+ is aimed at your TV during the search. You may
have to press this sequence of buttons (POWER*
then TV) up to 100 times to search the entire library
of codes.
5.
When your TV turns OFF, press and release SETUP
to lock in the code for your TV. Your Cinema 6+ is
now programmed to operate your TV.
*If you are searching for your VCR, CD, LD or DVD Player
code, you may want to play a tape or disk and use the STOP
key instead of the POWER key to search for your code.
When your VCR stops, press SETUP to lock in your code.
NOTE: To search for the codes of your other components,
repeat Steps 1 through 5, only substitute the appropriate
device key (ie., VCR, DVD/LD, RCVR, CD or CBL/SAT) for
the component you are searching for.
RETRIEVING THE CODES PROGRAMMED INTO THE
Cinema 6+
If you have set up the Cinema 6+ using the “SEARCHING
FOR YOUR CODE” procedure, you may want to figure out
which four-digit code is operating your equipment. Use this
procedure after you have set up your components to find out
which four-digit code is operating your equipment. For exam-
ple, to find out which code is operating your TV after setting
up your TV using the “SEARCHING FOR YOUR CODE”
procedure:
1.
Press TV and release. Press and hold SETUP until the
Cinema 6+’s red light blinks twice, then release
SETUP.
2.
Press 9 - 9 - 0.
3.
For the first digit of your four-digit code, press 1 and
count the number of times the red light (LED) blinks
on the Cinema 6+. If the light does not blink when
you press the number 1, the digit is zero.
4.
For the second digit, press 2 and count the number
of times the red light (LED) blinks on the Cinema 6+.
Magnavox
0027, 0014
Memorex
0000
Movie Time
0063, 0156
Novaplex
0618
Setup Codes for Cable Converters (continued)
NSC
0063, 0156
Oak
0007, 0019
Optimus
0021
Panasonic
0021, 0107, 0000
Panther
0637
Paragon
0000
Philips
0153, 0027, 0031
Pioneer
0144, 0023, 0533
Popular
Mechanics
0400
Prelude
0770
Pulsar
0000
RadioShack
0015, 0315, 0797, 0833
RCA
0021
Realistic
0207
Recoton
0400
Regal
0259, 0020
Regency
0002
Rembrandt
0011
Runco
0000
Samsung
0144, 0040
Scientific Atlanta 0477, 0008, 0017
Seam
0510
Signal
0015, 0040
Signature
0011
SL Marx
0040
Sprucer
0021
Starcom
0003, 0015
Stargate
0015, 0040, 0797
Starquest
0015
Sylvania
0001
Tandy
0258
Teleview
0040
Texscan
0001
TFC
0310
Timeless
0418
Tocom
0012, 0013
Toshiba
0000
Tusa
0015
TV86
0063
Unika
0153, 0022, 0207
United Artists
0007
United Cable
0003
Universal
0153, 0022, 0056, 0191, 0207
Videoway
0250
Viewstar
0063, 0027, 0258
Zenith
0525, 0000, 0015, 0207, 0008
Zentek
0400
Setup Codes for Satellites
AlphaStar DBS
0772
Chaparral
0216
Echostar DBS
0775
ExpressVu DBS 0775
General
Instrument
0361, 0627, 0869
Hitachi DBS
0819
HTS DBS
0775
Hughes Network
Systems DBS 0749
Jerrold Primestar 0627
Jerrold
0361
JVC
0775
Magnavox DBS
0722, 0724
Memorex DBS
0724
Panasonic DBS
0701
Philips DBS
0722, 0724
Primestar
0361, 0627
Proscan
0566
RCA DSS
0566, 0143, 0855
Sony DBS
0639
Star Choice DBS 0869
STS
0210
21
20
Web Site : http://www.oneforall.com
Web Site : http://www.oneforall.com