Oregon Scientific Atomic Projection Clock with Weather Forecast BAR623PA - Manual (Page 11)

11
EN
SET TIME ZONE / CLOCK / CALENDAR
You only need to do this if the unit is unable to
synchronize with the atomic clock broadcast, or if you
have disabled the atomic clock feature (see “Turn Atomic
Clock Signal ON / OFF” section).
To manually set the clock:
1. Press and hold MODE for 2 seconds. The Clock Area
will blink.
2. Select the US time zone, hour, minute, year, month,
day, and day-of-the-week language. Press or to
change the setting.
3. Press MODE to confirm.
NOTE The time zone options are (PA) Pacific, (CE)
Central, (MO) Mountain and (EA) Eastern.
NOTE The language options are (E) English, (F)
French, (D) German, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
ALARM
This product is equipped with a 2-minute crescendo
alarm.
VIEW ALARM SETTINGS
Press . The alarm time and status will show in the
Clock Area.
SET ALARM
1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press or to change
settings. Press to confirm.
ACTIVATE ALARM
Press to activate or deactivate the alarm. shows in
the Clock / Alarm Area when the alarm is activated.