Olympus FE-47 - Manual (Page 14)

14 EN
Shooting, Viewing, and Erasing
2
Hold the camera and compose the
shot.
1/400 F3.5
AUTO
Horizontal grip
Vertical grip
Monitor
When holding the camera, take care not to
cover the fl ash with your fi ngers, etc.
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
P P
1/400 F3.5 1/400 F3.5
AF target mark
Press halfway
Shutter speed Aperture value
“Focusing” (p. 44)
●
●
Shooting with the optimum
aperture value and shutter
speed [PROGRAM AUTO]
In this mode, automatic shooting settings are
activated while also allowing changes to a wide
range of other shooting menu functions, such
as exposure compensation, white balance, etc.
as needed.
1
Press the n button to turn on
the camera.
[PROGRAM AUTO] indicator
44
P P
0.0 0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
14 M
Number of storable still pictures (p. 48)
Monitor
(standby mode screen)
If the [PROGRAM AUTO] indicator is not
displayed, press the m button to display
the function menu and then set the shooting
mode to P. “Using the Menu” (p. 4)
Current shooting mode display
44
P P
0.0 0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
14 M
PROGRAM AUTO PROGRAM AUTO
Press the n button again to turn off
the camera.