31 en – Olympus FE-47 User Manual

Page 31

Advertising
background image

31

EN

For information on using the menus, see “Using the Menu” (p. 4).

When erasing pictures in a internal memory,

do not insert the card into the camera.

When erasing pictures from the card, insert

a card into the camera in advance.

To erase all images [ALL ERASE]

1

Use

FG to select [ALL ERASE], and

press the

H button.

2

Use

FG to select [YES], and press the

H button.

To individually select and erase
images [SEL. IMAGE]

1

Use

FG to select [SEL. IMAGE], and

press the

H button.

2

Use

HI to select the image to be

erased, and press the

H button to add a

R mark to the image.

Press the W zoom button to display an index
view. Images can be quickly selected using
FGHI. Press the T button to return to the
single frame display.

MENU

OK

SEL. IMAGE

ERASE/CANCEL

R mark

3

Repeat Step 2 to select the images to be

erased, and then press the

m button

to erase the selected images.

4

Use

FG to select [YES], and press the

H button.

The images with a R mark are erased.

Saving print settings to the image data
[PRINT ORDER]

q (Playback menu) X PRINT ORDER

“Print Reservations (DPOF)” (p. 40)

Print reservation can be set only for still

images that are recorded to the card.

Protecting images [

0]

q (Playback menu) X 0

Protected images cannot be erased by

[ERASE] (p. 18, 30), [SEL. IMAGE], or [ALL
ERASE] (p. 30), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 32).

1

Use

HI to select an image.

2

Press the

H button.

Press the

H button again to cancel the

settings.

3

If necessary, repeat Steps 1 and 2

to protect other images, and press the

m button.

Rotating images [y]

q (Playback menu) X y

1

Use

HI to select an image.

2

Press the

H button to rotate the image.

3

If necessary, repeat Steps 1 and 2 to

make settings for other images, and press
the

m button.

The new picture orientations will be saved

even after the power is turned off.

Adding sound to still images [R]

q (Playback menu) X R

1

Use

HI to select an image.

2

Aim the microphone toward the sound

source.

Microphone

3

Press the

H button.

Recording starts.

Advertising
This manual is related to the following products: