How to knead dough – Oster 137299 User Manual

Page 8

Advertising
background image

www.oster.com

8

How to Knead Dough

NOTE: NEVER TRY TO PROCESS DOUGH THAT IS TOO STIFF TO KNEAD
COMFORTABLY BY HAND.

NOTE: Make sure the unit is turned OFF and unplugged before use. Never use
hand to push food into processor. Do not use the processor continuously for
more than 3 minutes at a time.

Dough Blade: Use the dough blade for kneading bread dough and for mixing
batters and cake mixtures.

1 Lock the bowl onto base.

(See “How to assemble the bowl”)

2 Take the disc stem and slide it onto the

center post. Then grasp the dough blade
by its stem and slide over the disc stem
(Figure 5).

3 Place all the dry ingredients into

the bowl.

4 Lock cover onto bowl.

(See “How to Lock the cover”)

5 Place the food pusher into the feed tube.

6 Plug the cord into an electric outlet.

7 Press the ON button for continuous processing or the PULSE button for short

processing tasks. When using the PULSE setting, hold down the PULSE button
for about 2-3 seconds at a time, check results and repeat if desired.

NOTE: All liquid ingredients should be added through the food chute while
unit is processing. Add liquid in a slow, steady stream for even distribution. It
is important to add enough liquid to make the dough soft enough to knead.
Kneading dough that is too stiff ca n strain the machine.

8 When fi nished processing, press the OFF button and allow the dough blade

to stop rotating.

9 Twist the cover counter-clockwise to remove lid.

10 Hold the disc stem with dough blade attached by its stem and remove.

Unlock the bowl by turning it counter- clockwise towards the UNLOCK

mark, and lift off . Empty the processed food.

NOTE: The 10 Cup Food Processor comes with a spatula to easily empty
contents inside the bowl.

Figure 5

Advertising
This manual is related to the following products: