Changing volume lock – One for All URC-3605 User Manual

Page 17

Advertising
background image

CHANGING VOLUME LOCK

The One For All DVD Expert Universal Remote Control
is set at the factory for independent volume control of
each selected device.

However, you may change the Volume Lock setting to
Global Volume Lock so that a device’s volume will be
locked to one mode (e.g., to control TV volume in all
other modes).After that, if desired, you can perform
Individual Volume Unlock on a selected device to set its
volume control for independent operation.

Locking Volume Control To One Mode
(Global Volume Lock)

1.

Press and hold

SET

until the

LED

(red light)

blinks twice, then release

SET

.

2.

Enter

9

-

9

-

3

and then press any

mode key once (e.g.,

TV

). The

LED

will

blink twice.

3.

Now, when you press

VOL

,

VOL

, or

MUTE

, the volume of the selected device

(e.g.,

TV

) will be controlled, regardless of

the mode you have selected.

Unlocking Volume Control For A Single Device
(Individual Volume Unlock)

1.

After performing Global Volume Lock (on
page 16), press a desired mode key where
you want volume to be unlocked (e.g.,

AUX

) and controlled within its own mode.

2.

Press and and hold

SET

until the

LED

(red

light) blinks twice, then release

SET

.

3.

Enter

9

-

9

-

3

and then press

VOL

once.

The

LED

will blink four times.

4.

If desired, repeat steps 1 through 3
(of this section) for each device that you
want volume to be unlocked.

5.

Now, after you select a device that has
volume unlocked (e.g.,

AUX

), pressing

VOL

,

VOL

, or

MUTE

will control the

device’s volume only in its own mode.

continued on next page...

17

IMPVE4P manual 1.0 4/11/03 4:34 PM Page 17

Advertising