Olympus E-P3 - Manual (Page 58)

58 EN
Other shooting options
2
FL BKT (FL bracketing)
The camera varies fl ash level over three shots (no modifi cation on the fi rst shot, negative on
the second, and positive on the third). In single-frame shooting, one shot is taken each time
the shutter button is pressed; in sequential shooting, all shots are taken while the shutter
button is pressed.
The
0 indicator turns green during bracketing.
The size of the bracketing increment changes with the
value selected for [EV Step].
g “Customizing camera
settings” (P. 81)
•
•
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT
--
--
--
--
A-- G--
3f 0.7EV
3f 0.3EV
3f 1.0EV
Off
Bracketing
Back Set
ISO BKT (ISO bracketing)
The camera varies sensitivity by 0.3 EV, 0.7 EV, or 1.0 EV over three shots (no modifi cation
on the fi rst shot, negative on the second, and positive on the third), bracketing the current
sensitivity setting (or if auto sensitivity is selected, the optimal sensitivity setting) while
keeping shutter speed and aperture fi xed. In single-frame shooting, one shot is taken each
time the shutter button is pressed; in sequential shooting, all shots are taken while the shutter
button is pressed.
The size of the bracketing increment does not change with
the value selected for [ISO Step].
g “Customizing camera settings” (P. 81)
Bracketing is performed regardless of the upper limit set
with [ISO-Auto Set].
g “Customizing camera settings”
(P. 81)
•
•
AE BKT
WB BKT
FL BKT
ISO BKT
ART BKT --
--
--
--
A-- G--
3f 0.7EV
3f 0.3EV
3f 1.0EV
Off
Bracketing
Back Set
ART BKT (ART bracketing)
Each time the shutter is released, the camera records multiple images, each with a different
art fi lter settiing. You can turn art fi lter bracketing on or off separately for each picture mode.
Recording may take some time.
ART BKT can not be combined with WB BKT or ISO BKT. •
• ART BKT
Pop Art
Light Tone
Off
Off
Off
Off
Off
Pin Hole
Diorama
Off
Off
Soft Focus
Pale&Light Color
Grainy Film
Back Set
Off
On
Digital Zoom (Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. Zoom is increased by about 2×.
1 Select [On] for [Digital Tele-converter] in Shooting menu
X (P. 107).
2 The view in the monitor will be enlarged by a factor of two.
The subject will be recorded as it appears in the monitor.
# Cautions
Digital zoom is not available with multiple exposures or when
T, s, f, w, or m is
selected in
SCN mode.
When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
•
•
•