Optimus 16-421 - Manual (Page 23)

23
1. Press MENU to display the main menu
screen.
2. Repeatedly press SEL or SEL to
select VCR , then press SET .
3. Repeatedly press SEL or SEL to
select BEEPER , then press SET to select
ON or OFF .
4. Press MENU twice to exit.
USING THE TIMER FEATURES
Setting/Cancelling the On Timer
Follow these steps to set the TV/VCR to turn on
at a specified time.
1. Press ON TIMER on the remote control. The
ON TIMER screen appears.
2. Repeatedly press (or press and hold) SEL
or SEL to select the hour when you
want the TV/VCR to start playing, then
press
SET .
Note: Your TV/VCR uses a 12-hour clock.
Be sure
AM or PM appears correctly.
3. Repeatedly press (or press and hold) SEL
or SEL to select the minute when you
want the TV/VCR to start playing, then
press
SET .
4. Repeatedly press (or press and hold) SEL
or SEL to select the channel number
you want the TV/VCR to tune to when it
turns itself on, or select
PLAY if you want
the TV/VCR to play a tape when it turns
itself on.
Notes:
• If you want to play a tape when the TV/
VCR turns itself on, be sure to insert a
cassette tape.
• If an entry is not correct, repeatedly
press SET to move forward or CLEAR to
move backward to the incorrect entry
then correct it.
5. Press ON TIMER . The following screen
appears for about 5 seconds, and the ON
TIMER indicator lights on the front panel.
The TV/VCR turns itself on at the time you
selected.
To cancel the on timer, press ON TIMER to
display ON TIMER SET CANCEL: PUSH
CLEAR KEY on the TV screen, then press
CLEAR within about 5 seconds. ON TIMER
END appears on the screen.
Note: After the TV/VCR has been on for 60
minutes, it turns itself off again unless you
press any button on the remote control or
front panel.
16-421.fm Page 23 Tuesday, July 20, 1999 12:01 PM