Oricom S6000 - Manual (Page 19)

• The number of new and old records will be displayed.
• After two seconds time-out or a function key is pressed, the most
displayed first. If the call log is empty,
19 of 42
ve subscribed your telephone network operators Call Waiting
Calle
pho
external call, a series of short beeps is
heard announcing the second call. You can look at the number
ands
nd call.
Press
Call Waiting Caller ID
f you ha I
r ID service, your phone will display the number of the other
incoming call for around 30 seconds while you are talking on the
ne.
While the handset is on an •
displayed on the h et and choose to place the first call on hold
and answer the seco
• then to place the first external call on hold and
answer the 2 nd call.
• Press then to toggle between two calls.
Call Log
Up to 20 calls can be stored in the call log.
If the same call is missed more than once, the number of time it has
called will be saved together with the caller ID.
Once there is at least one new CID on the call log, the
icon will be
ily on all the time until all the new records are reviewed. stead
ote: The call log is stored on the handset. Deletion or reviewing of call
andset will not affect other handsets registered
•
N
records on one h
to the same base unit.
Review the Call Log
Press during standby.
recent received CID is
EMPTY will be displayed for 2 seconds and returned to standby.
• Use to scroll through the call log.
• The status (new) of the caller ID will be displayed together with the
r of times the call has come in, if applicable.
Press
numbe
• to view other information of the caller ID.
• To exit, press
Saving the CID record into phonebook
private
phonebook.
Pr
The number of the selected CID can be saved into the
• ess on a CID while reviewing the call log.
• Use to select SAVE ENTRY and press .
NAME? and the name of the CID (transmitted from the network or
from the phoneboo •
k) will be displayed.
• Use the numeric keys and to enter or edit the name for the
phonebook name.
entry. User can refer to Editing an Entry Section on how to edit the
• Press . The display reads NUMBER? and the number of the
CID will be displayed. Use the numeric keys and to enter or
the number for the entry.
ess
edit
• Pr to confirm.
•
c read
If the new entry has the same name as a previously entered
re ord in the private phonebook. The display will
REPLACE? together with the name of the entry.
o Press , the number of the previous record with same
name will be replaced with the new number.