Document Outline

• CS1W-ETN01 (10Base-5) CS1W-ETN11 (10Base-T) CJ1W-ETN11 (10Base-T) Ethernet Units
• Notice:
• About this Manual:
• Warranty
• PRECAUTIONS
  • 1 Intended Audience
  • 2 General Precautions
  • 3 Safety Precautions
  • 4 Operating Environment Precautions
  • 5 Application Precautions
  • 6 Conformance to EC Directives
    • 6-1 Applicable Directives
    • 6-2 Concepts
• SECTION 1 Features and System Configuration
  • 1-1 Features
  • 1-2 System Configuration
    • 1-2-1 Device Configuration
    • 1-2-2 Node Connections
  • 1-3 Devices Required in a Network
    • 1-3-1 10Base-5 Ethernet Unit
    • 1-3-2 10Base-T Ethernet Unit
  • 1-4 Related Programming Devices
  • 1-5 Specifications
  • 1-6 Software Configuration
  • 1-7 IP Addresses
    • 1-7-1 IP Address Configuration
    • 1-7-2 Allocating IP Addresses
    • 1-7-3 IP Address Settings
    • 1-7-4 Subnet Masks
  • 1-8 Precautions
    • 1-8-1 Installation
    • 1-8-2 Ethernet and IEEE802.3 Standards
• SECTION 2 Communications Functions
  • 2-1 Communications Functions
    • 2-1-1 Ethernet Unit Functions
    • 2-1-2 Socket Ports Used By the Ethernet Unit
    • 2-1-3 Selecting Communications Services
  • 2-2 FINS Communications
  • 2-3 Socket Services
  • 2-4 FTP Server
  • 2-5 Mail
• SECTION 3 Installation and Initial Setup
  • 3-1 Before Operation
    • 3-1-1 Automatic Address Generation
    • 3-1-2 IP Address Table
  • 3-2 Overview of Startup Procedure
  • 3-3 Unit Components
    • 3-3-1 Nomenclature
    • 3-3-2 Indicators
  • 3-4 Switch Settings
    • 3-4-1 CS-series Ethernet Units
    • 3-4-2 CJ-series Ethernet Units
  • 3-5 Mounting to a PC
    • 3-5-1 Mounting to a CS-series PC
    • 3-5-2 Mounting to a CJ-series PC
  • 3-6 Connecting to the Network
    • 3-6-1 Ethernet Network Installation
    • 3-6-2 Ethernet Connectors
    • 3-6-3 Connecting the Cable
    • 3-6-4 Connecting the Power Supply (CS1W-ETN01 Only)
  • 3-7 Creating an I/O Table
    • 3-7-1 I/O Table Overview
    • 3-7-2 Connecting Programming Devices to the PC
    • 3-7-3 Procedure for Creating an I/O Table
  • 3-8 Creating Routing Tables
    • 3-8-1 Routing Table Overview
    • 3-8-2 Connecting and Using a Peripheral Device for the PC
  • 3-9 System Setup
    • 3-9-1 When Settings are Required
    • 3-9-2 Using a Programming Device
    • 3-9-3 CPU Bus Unit System Setup Defaults
  • 3-10 Creating an IP Address Table
  • 3-11 Creating an IP Router Table
  • 3-12 Checking Communications
    • 3-12-1 PING Command and Internode Testing
    • 3-12-2 PING Command
    • 3-12-3 Internode Test
    • 3-12-4 Simple Startup Test Example
• SECTION 4 System Setup and Memory Allocations
  • 4-1 Allocated Words
  • 4-2 CPU Bus Unit System Setup
    • 4-2-1 Settings
    • 4-2-2 Mail Settings
  • 4-3 CIO Area Allocations
  • 4-4 DM Area Allocations
• SECTION 5 FINS Communications
  • 5-1 Overview of FINS Communications
    • 5-1-1 Communications On an Ethernet Network
    • 5-1-2 FINS Communications Service Features
  • 5-2 Procedure Before Using FINS Communications
  • 5-3 Sending Commands From a PC
    • 5-3-1 Communications Specifications
    • 5-3-2 Program Example
    • 5-3-3 Transmission Delays
  • 5-4 Sending Commands From a Host Computer
    • 5-4-1 Designating Remote Addresses
    • 5-4-2 FINS Frames
    • 5-4-3 Sample Program
    • 5-4-4 Delays for Accessing PC Memory
  • 5-5 FINS Server
• SECTION 6 Socket Services
  • 6-1 Overview
    • 6-1-1 Socket Service Functions
    • 6-1-2 Sockets
    • 6-1-3 Using Sockets with the Ethernet Unit
    • 6-1-4 Socket Port Numbers
    • 6-1-5 Differences between TCP and UDP
    • 6-1-6 Opening TCP Sockets
    • 6-1-7 Fragmentation of Send Data
    • 6-1-8 Maximum Transmission Delays
    • 6-1-9 Precautions in Using Socket Services
  • 6-2 Using Socket Services with Socket Service Request Switches
    • 6-2-1 Socket Service Parameters
    • 6-2-2 Response Codes
    • 6-2-3 Socket Service Request Switches
    • 6-2-4 UDP/TCP Socket Status
    • 6-2-5 Application Procedure
    • 6-2-6 Socket Services and Socket Status
    • 6-2-7 Timing Charts
    • 6-2-8 TCP/IP Communications Programming Example
    • 6-2-9 UDP/IP Communications Programming Example
  • 6-3 Using Socket Services with CMND(490)
    • 6-3-1 UDP/TCP Socket Status
    • 6-3-2 Socket Services and Socket Status
    • 6-3-3 Communications Timing Chart
    • 6-3-4 Socket Service Timing Chart
    • 6-3-5 TCP/IP Communications Programming Example
    • 6-3-6 UDP/IP Communications Programming Example
• SECTION 7 FTP Server
  • 7-1 Overview
  • 7-2 Setting Login Names and Passwords
  • 7-3 Using File Memory
  • 7-4 FTP Server Application Example
  • 7-5 Using FTP Commands
    • 7-5-1 Table of Commands
    • 7-5-2 Using the Commands
    • 7-5-3 Error Messages and FTP Status
  • 7-6 UNIX Application Example
• SECTION 8 Mail
  • 8-1 Overview of Mail Function
    • 8-1-1 Mail Contents
    • 8-1-2 Mail Triggers
    • 8-1-3 Sending Mail
    • 8-1-4 Mail Status
  • 8-2 Sending Mail
  • 8-3 Mail Example
• SECTION 9 Testing Communications
  • 9-1 Communications Testing Functions
  • 9-2 PING Command
    • 9-2-1 Ethernet Unit
    • 9-2-2 Host Computer
  • 9-3 Internode Test
    • 9-3-1 Running the Test
    • 9-3-2 Checking Results
• SECTION 10 Troubleshooting
  • 10-1 Troubleshooting with Indicators
  • 10-2 Error Status
  • 10-3 Error Log
  • 10-4 Error Log Error Codes
  • 10-5 Troubleshooting Procedures
    • 10-5-1 Startup Problems
    • 10-5-2 FINS Communications Problems (SEND(090)/RECV(098)/ CMND(490))
    • 10-5-3 UDP Socket Problems
    • 10-5-4 TCP Socket Problems
    • 10-5-5 FTP Service Problems
    • 10-5-6 Network Connection Problems
    • 10-5-7 Mail Problems
  • 10-6 Troubleshooting with Response Codes
  • 10-7 Results Storage Area Response Codes
• SECTION 11 FINS Commands Addressed to Ethernet Units
  • 11-1 Command Codes and Response Codes
    • 11-1-1 Command Code List
    • 11-1-2 Response Code List
  • 11-2 Socket Applications
    • 11-2-1 Format
    • 11-2-2 PC Memory Areas
  • 11-3 Command/Response Reference
    • 11-3-1 RESET
    • 11-3-3 CONTROLLER STATUS READ
    • 11-3-4 INTERNODE ECHO TEST
    • 11-3-5 BROADCAST TEST RESULTS READ
    • 11-3-6 BROADCAST DATA SEND
    • 11-3-8 ERROR LOG CLEAR
    • 11-3-9 UDP OPEN REQUEST
    • 11-3-10 UDP RECEIVE REQUEST
    • 11-3-11 UDP SEND REQUEST
    • 11-3-12 UDP CLOSE REQUEST
    • 11-3-13 PASSIVE TCP OPEN REQUEST
    • 11-3-15 TCP RECEIVE REQUEST
    • 11-3-17 TCP CLOSE REQUEST
    • 11-3-19 IP ADDRESS TABLE WRITE
    • 11-3-22 IP ROUTER TABLE READ
    • 11-3-23 PROTOCOL STATUS READ
    • 11-3-24 MEMORY STATUS READ
    • 11-3-26 ADDRESS INFORMATION READ
    • 11-3-27 IP ADDRESS READ
• Appendix A Network Installation
• Appendix B Ethernet Network Parameters
• Appendix C Buffer Configuration
• Appendix D TCP Status Transitions
• Appendix E Auxiliary Area Data
• Appendix F CPU Bus Unit Allocations in the CPU Unit
• Appendix G ASCII Characters
• Appendix H Dimensions
• Appendix I Maintenance
• Appendix J Inspections
• Index
• Revision History