Olympus 730 - Manual (Page 52)

52
EN
Usi
ng OLYMPUS Mast
er
Be sure that your battery is fully charged!
1
Make sure that your PC is connected to
the Internet. Click “Update Camera”
on the OLYMPUS Master main menu.
• After selecting the Update Camera function OLYMPUS
Master shows a Window with security advices.
2
Plug the USB cable into the USB port on
the computer.
3
Plug the other end of the USB cable into the camera’s USB multi-
connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is displayed.
4
Select [PC], and press
.
5
Click “OK”.
• OLYMPUS Master will recognize the
actual Version of your camera now.
• Click “Check for latest Version” and
the Software is searching at the
Olympus Homepage for new Camera
firmware versions and for additional
languages. Then you can select an
additional language.
6
After click “Update” is now
downloading the new
language to your camera.
Please do not remove any
cable or the battery while the
camera is processing.
7
After the download procedure
the camera display will show
“OK”. You can remove the cables and turn power off. After restarting
the camera you will be able to choose the new language from [SET
UP].
To increase the number of languages