Sylvania NB500SL9 - Manual (Page 22)

20 EN
BASIC PLAYBACK
HDMI
CLEAR A-B
MODE PAUSE
REV PLAY FWD
SUBTITLE AUDIO
DISPLAY
SEARCH
STOP
RED GREEN BLUE YELLOW
POWER
OPEN/
CLOSE
ENTER
PLAY
STOP
1 Press [POWER].
2 Turn on the TV and select the
appropriate input on the TV to which
the unit is connected.
3 Press [OPEN / CLOSE A ] to open the
disc tray.
4 Place the disc on the disc tray with its
label side facing up.
Align the disc to the
disc tray guide.
5 Press [OPEN / CLOSE A ] to close the
disc tray.
It may take a while to load the disc.
Some discs may start playback automatically.
6 Press [PLAY B ] to start playback.
For many of BD-video and DVD-video, a menu
screen may appear.
In this case, use [K / L / s / B] to select the
desired item, then press [ENTER].
7 Press [STOP C ] once to stop
playback temporarily.
Refer to “Resume Playback” on page 21.
To eject the disc:
Press [OPEN / CLOSE A ] to open the disc tray,
then remove the disc before turning off the unit.
Note
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
The operation may vary when you play back
BD-video and DVD-video with disc menu. Refer to
the manual accompanying the disc for details.
•
•
•
Playback
E5H40UD_NB500SL9_EN.indd 20 E5H40UD_NB500SL9_EN.indd 20 2008/04/14 13:57:17 2008/04/14 13:57:17