Olympus C-4040ZOOM - Manual (Page 23)

Example of How to Set a Function
Follow the steps below to set one function in MODE MENU. In this example,
you will set
(beep sound) to OFF when the mode dial is set to P.
23
1 Set the mode dial to P and press
to display the top menu.
DRIVE
WB
MODE MENU
2 Press
í
to enter
MODE MENU.
PIC
SET
CARD
ISO
A/S/M
FLASH
DRIVE
AUTO
IN+
CAMERA
A screen is
displayed with
tabs on the left.
3 Keep pressing
ñ
until the SETUP tab
is selected.
SETUP
CAM
CARD
PIC
LOW LOW
ON ON
ON ON
RESET RESET
REC VIEW REC VIEW
FILE NAME FILE NAME
PIXEL MAPPING PIXEL MAPPING
ALL RESET ALL RESET
4 Press
í
to enter
SETUP.
SETUP
CAM
CARD
PIC
LOW LOW
ON ON
ON ON
RESET RESET
REC VIEW REC VIEW
FILE NAME FILE NAME
ALL RESET
PIXEL MAPPING PIXEL MAPPING
SETUP
CAM
CARD
PIC
LOW LOW
ON ON
ON ON
RESET RESET
REC VIEW REC VIEW
FILE NAME FILE NAME
ALL RESET ALL RESET
PIXEL MAPPING PIXEL MAPPING
5 Press
ñ
to select
.
6 Press
í
to display
OFF/LOW/HIGH.
SETUP
CAM
CARD
PIC
REC VIEW REC VIEW
FILE NAME FILE NAME
ALL RESET ALL RESET
HIGH
OFF
LOW
PIXEL MAPPING PIXEL MAPPING
The factory
default setting is
LOW.
7 Press Ñ to select
OFF.
8 Press to save the
setting. To go back to
shooting, press
again.
The å mark
moves to the
selected tab and
the selection
becomes
highlighted.
Note: Setting in one shooting mode will be the same in other shooting
modes. Menu functions cannot be set separately for each shooting mode.
1 C-4040ZBasic-E2 01.6.25 11:16 AM Page 23