Olympus C-4040ZOOM - Manual (Page 7)

7
Control panel indications
Control panel indications
1
Flash mode
● Displayed when the flash mode is selected by pressing the
(flash
mode) button.
No indication: Auto-flash,
: Red-eye reduction flash, : Fill-in flash,
SLOW: Slow synchronization flash, : Off (flash override)
2
Manual Focus
● Displayed when locking focus using the Manual focus function.
3
Flash intensity control
● Displayed when the amount of the light emitted by the flash is adjusted.
4
Battery check
● When remaining battery power is low, the battery check indication
changes as follows:
● Be aware that the time when the battery check indication appears
varies depending on the type of batteries used.
1 3 4
2
0
!
@
#
$ % ^ &
5
6
7
8
9
5
Card error
● When the power is turned on, the camera checks the card. If there is a
problem with the card, this indication appears.
6
White balance
● Displayed when the White balance is set to any mode except AUTO.
7
ISO
● Displayed when the ISO is set to any mode except AUTO. When the
ISO is increased automatically in the AUTO mode, this indication blinks.
Fully charged Low power
No power
Blinks, then turns off.
1 C-4040ZBasic-E2 01.6.25 11:16 AM Page 7