Oricom P80 - Manual (Page 9)

9
BASIC OPERATIONS
During standby
When the phone is in standby, the LCD displays the handset label. The
handset number related to the connected base will also be displayed right
justified. The battery icon reflects the current battery level and the signal
icon indicates the handset is linked to the base.
Answering an incoming external call
When there is an incoming call, the phone rings and
flashes. If a CID
record is received, the caller information is displayed.
turns on if the phone number contains more than 12 digits. In this case,
only the last 12 digits are displayed.
If you press
when the phone is ringing, the handset ringer will be turned
off for this incoming call.
1. Press
to answer the call. turns on.
2. Call timer is displayed 10 seconds after the call is connected
3. Press
or place the handset on the base cradle to disconnect.
Making an external call
Your phone allows you to dial out a phone number in various ways.
Normal dialing
1. Press
and wait for the dial tone.
2. Use the number pad to dial the phone number. The display shows the
digits as you enter them.
3. When you enter more than 12 digits, turns on. In this case, you only
see the last 12 digits on the screen.
ORICOM 1
JOHN
BASIC OPERATION