Optoma Optoma TXR774 - Manual (Page 42)

English
42
Setup | Network
Network
Press Enter to apply Network settings. If the connection is successful,
the OSD display will show the following dialogue box.

Network State—to display network information.

DHCP:
On: Assign an IP address to the projector from the DHCP server
automatically.
Off: Assign an IP address manually.

IP Address—Select an IP address

Subnet Mask—Select subnet mask number.

Gateway—Select the default gateway of the network connected to the
projector.

DNS—Select DNS number.

Apply—Press Enter to apply the selection.
User Controls