Oki 58374501 - Manual (Page 2)

2
3. Install the metal brackets where the
breakout panels were.
4. Open the face-up stacker ( ! ), then open
the flap and press it onto the stacker surface
(
" ).
5. Close the stacker.
Step 2: Prepare the Inverter
Before assembling the finisher, you must adjust the
height of the inverter unit to match the finisher:
! Inverter as supplied
" Inverter changed for use with 4-tray
finisher.
1. Unpack the inverter and remove any packing
materials.