Oregon Scientific Portable UV Monitor E8612 - Manual (Page 2)

To silence the alarm:
Press any button.
SETTINGS
To change clock settings:
1. In clock mode, press and hold MODE / SET.
2. Use UP and DOWN to select the desired setting.
3. Press MODE / SET to confirm. The settings order is:
12/24 hr format, hour, minute, o C/ o F.
To change skin type / SPF settings
1. In UV mode press and hold MODE / SET.
2. Use UP and DOWN to select the desired setting.
3. Press MODE / SET to confirm. The settings order is:
skin type / SPF.
KEY LOCK
To activate / de-activate key lock:
Press and hold START / STOP / UP, then press CLEAR /
DOWN. indicates key lock is activated.
PRECAUTIONS
This unit is engineered to give you years of satisfactory
service if you handle it carefully. Here are a few
precautions:
• Do not immerse the unit in water.
• Use a soft, slightly moistened cloth to clean the unit.
Do not use abrasive or corrosive cleaning agents, as
these may cause damage.
• Do not subject the product to excessive force, shock,
dust, temperature changes, humidity and direct sunlight
for extended periods.
• Do not tamper with the internal components. Doing
so will terminate the product warranty and may cause
damage. The unit contains no user-serviceable parts.
• Remove the batteries when storing the product for a
long time. Do not mix new and old batteries.
• Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
NOTE The technical specifications for this product and
the contents of the user guide are subject to change
without notice.
SPECIFICATIONS
TYPE DESCRIPTION
Unit dimension 80 x 43 x 20mm
(H x W x D) (3.2 x 1.7 x 0.9 inches)
Unit weight 78g (2.75 ounces)
without battery
UVI range 1-25
Clock time 12 or 24-hour format
Temperature unit °C / °F
Alert sound 2 minutes
Timer 1 min up to 39 hrs 59 mins
Operating -20°C to 60°C
temperature (-4°F to 140°F)
Water resistance IPX-2 / JIS2
Power 1 x CR2032 battery
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more
about Oregon Scientific products such as digital cameras;
MP3 players; children’s electronic learning products and
games; projection clocks; health and fitness gear; weather
stations; and digital and conference phones. The website
also includes contact information for our Customer Care
department in case you need to reach us, as well as
frequently asked questions and customer downloads.
We hope you will find all the information you need on our
website, however if you’re in the US and would like to
contact the Oregon Scientific Customer Care department
directly, please visit:
www2.oregonscientific.com/service/default.asp
OR
Call 1-800-853-8883.
For international inquiries, please visit: www2.oregonscie
ntific.com/about/international.asp
EU DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Portable
UV Monitor (EB612) is in compliance with EMC directive
89/336/CE. A copy of the signed and dated Declaration of
Conformity is available on request via our Oregon Scientific
Customer Service.
COUNTRIES RTTE APPROVAL COMPLIED
ALL EU countries, Switzerland CH
and Norway N
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for
support or sales. Please call our customer service number
(listed on our website at www.oregonscientific.com), or
on the warranty card for this product) for all inquiries
instead.
We
Name:
Oregon Scientific, Inc.
Address: 19861 SW 95 th Ave.,Tualatin,
Oregon 97062 USA
Telephone No.: 1-800-853-8883
declare that the product
Product No.:
EB612
Product Name: Portable UV Monitor
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate,
Phase 1,41 Man Yue St.,
Hung Hom, Kowloon, Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference
that may cause undesired operation.
2006 Oregon Scienfitic. All rights reserved.
P/N: 086L004328-014
C
EB612_IM_USA_EN 2006.3.3, 3:11 PM 2