Oricom P900 - Manual (Page 12)

12
When you end a call, the timer will be displayed for 5 seconds before the
screen returns to the handset label.
Adjusting the volume
During a call you can adjust the earpiece volume.
Press to adjust the receiver volume. The display shows the
volume level of high “OOO”, medium “OO” or low “O”.
NOTE: When you hang up the volume with return to the default level.
Muting the call
1. Press
MUTE to mute the call. turns on. The caller would not be
able to hear you but you would still be able to hear the caller.
2. Press MUTE again to un-mute the call.
Chain dialling
You can dial out numbers from the phonebook even after you have
seized the phone line. And there is no limit to the number of times chain
dialling is accessed.
1. Press . turns on.
2. Press
to scroll through the phonebook records. Or you
can use the number keys to jump directly to the record starting with
the corresponding letters of that key. If you decide to quit using
chain dialling, simply press to exit.
3. Press OK to dial out the number.
Call waiting
You can use the recall function to answer a second call while you are on
the phone. However this service will need to be turned on. For example
to turn on Telstra’s Call Waiting service:
1. Press wait for dial tone then Press *43#
2. You will hear a service tone then Press .