Optimus MD-1600 - Manual (Page 40)

40
Editing Techniques and
Display Contents
Key Pressure (Velocity) — Use the
keyboard, number buttons, or
+ and – to
adjust the key pressure. To change the
key pressure using the keyboard, be
sure to turn on touch response.
Pitch — Enter a new note on the key-
board or use
+ or – to change to the next
higher or lower note. The keyboard and
the staff on the display show your new
entry.
Chord — Use the appropriate chord fin-
gering method as determined by the
MODE setting.
Tone Number/Rhythm Number — Use
the number buttons or
+ or – .
Rhythm Controller ( INTRO , NORMAL/
FILL-IN , VAR/FILL-IN , SYNCHRO/END-
ING )/Drum Pad — Press the button you
want to change to.
Deleting Individual Data
1. Follow Steps 1–5 under “Editing
Memory Contents” on Page 39.
2. Press + and – at the same time.
DataDel? appears.
3. Press to delete the selected
data.
Or press or (or + or – ) to cancel
the procedure without deleting any-
thing.
Deleting All Data in a Specific
Track
1. Press MEMORY until Rec. No.
appears. Within 5 seconds, use + or
– to select a song number.
2. Hold down MEMORY until
Tr.Del.? appears.
3. Within 5 seconds, press MEMORY
TRACK for the track(s) you want to
delete.
• You can specify more than one
track by pressing more than one
button.
• To deselect a track, simply press
its button again.
The track contents indicator(s) for
the selected track flash(es).
4. To delete the data in the selected
track(s), press . The keyboard
goes into playback standby mode.
To exit the track delete procedure with-
out changing any data, press
MEMORY .
Notes:
• You cannot change the song num-
ber after Tr.Del.? appears.
• You cannot select a track that does
not contain any recorded data.
42-4043.fm Page 40 Tuesday, August 3, 1999 6:51 AM