One for All URC-7525 - Manual (Page 9)

8
WWW.ONEFORALL.COM
If a key group controls one device, it does not mean that you cannot access that
function for your other device. For example, pressing the Menu key will send the
Menu function for your Set Top Box. But once in a while you may want to con-
trol the Menu of your TV (for example to change colour or brightness). This
function is available as a “Shifted” function. To access a shifted function, press
and release the Magic key, followed by the function you require (in this case
Menu) within ten seconds.
-
Pressing no key for ten seconds will mean that the remote returns to the
“non-shifted” state.
- When in shifted mode, once you pressed the function key the remote will
remain in shifted mode for another 10 seconds.
If a key group is assigned to one device, the alternate device’s function is auto-
matically shifted. So for example, if the Volume keys are assigned to TV, the Set
Top Box’s Volume controls are accessible by the shifted method above.
If you would like to change which Key Group is assigned to which device, this
can be easily accomplished by following the steps on pag. 8 - 9.
Shifted mode (MAGIC = Shift)
Changing Key Groups
As shown in the table on page 7, key groups are assigned by default to
either TV or Set-Top-Box (STB). If you choose, you can change which
Device a Key Group is assigned to. For example, you may want the
Fastext Key Group (Red, Green, Yellow and Blue) to control your TV and
not your Set Top Box.
If you wish to change the device controlled by a Key Group, first you will need
to find out what the “representative” key is for that particular Key Group. In
this example, the representative key for the Fastext Key Group is the Red key.
The list of representative keys is shown below:
Key Group Name Representative Key
Power Power
Text Controls Text On
16:9 16:9
Digits -/--
AV AV
Volume Controls Volume Up
Channel Controls Channel Up
Menu Controls Menu
Fastext Keys Red
Digifunctions Guide
To change which device a Key Group controls:
Example: changing the “Fastext Keys” (represented by the Red Key – see table
above) from “Set-Top-Box, Digital Satellite, Cable Box” control into Television,
LCD-TV, Plasma-TV control :
1 Press and hold the MAGIC key until the red light (LED underneath the TV
Icon) blinks twice (the red LED will light up once then twice).
2 Press the representative key of the group you want to change (in this
example, the Red key).
705071_URC-7525_S_10t.qxd:Ofa5_Digital_URC7555_EURO_10_Talen 04-12-2007 09:50 Pagina 8