One for All Kameleon URC-9964B00 - Manual (Page 54)

K
AMELEON
8-D
EVICE
R
EMOTE WITH
RF
54 Troubleshooting
TROUBLESHOOTING
PROBLEM: No display at all times.
SOLUTION: Replace batteries with four new AA alkaline batteries.
PROBLEM: The bottom two IR indicator segments are flashing.
SOLUTION: Replace batteries with four new AA alkaline batteries.
PROBLEM: No display when programming.
SOLUTION: Display has turned off due to inactivity. Start programming
again and do not pause while performing instructions.
PROBLEM: During programming, the two bottom IR segments display
a long flash.
SOLUTION: An invalid entry has occurred. Check the keys to be pressed
and start program again.
PROBLEM: How do I stop programming?
SOLUTION: Press HOME once to return to the Program Keys screen.
Press HOME once more to exit completely.
PROBLEM: The unit does not control home entertainment devices or
commands are not working properly.
SOLUTION: Try all listed codes for the device brands being set up.Make
sure they can be operated with an infrared remote control.
PROBLEM: Tried Searching For Your Code method and still could not
find a working code.
SOLUTION: Perform Restoring Factory Default Settings on page 40. Then
repeat Searching For Your Code on page 19.
PROBLEM: Cannot program a macro onto M1 – M4 or POWER keys.
SOLUTION: Make sure the total number of key presses being
programmed is less than 15.
PROBLEM: Power macro does not execute.
SOLUTION: First, press the Home Theater key once, then press POWER
once.
OFA Kameleon wRF UG rev 3.fm Page 54 Monday, September 13, 2004 11:18 AM