Outlaw Audio SEVEN-CHANNEL POWER AMPLIFIER VERSION 1.0 7125 - Manual (Page 10)

10 Outlaw Audio
Owner’s Manual
Model 715 Specifications
Power Output 125 watts RMS x 7 (all channels driven
simultaneously into 8 ohms from 20Hz to
20kHz with less than 0.05% total harmonic
distortion). 190 watts RMS x 7 @ 4 ohms
Frequency Response 20Hz -20kHz +/- 0.1 dB at rated output
Total Harmonic Distortion (THD) Less than 0.05% at rated output,
all frequencies, less than 0.01% at 1kHz
Intermodulation Distortion (IMD) Less than 0.05% at rated output
Power Bandwidth 5Hz - >125kHz +0/-3 dB
Damping Factor Greater than 400 from 10Hz to 400Hz
Crosstalk Greater than -90dB from 20Hz to 20kHz
Gain Voltage gain of 28dB.
Slew Rate 50v/Microsecond
Input Impedance Nominal 50k ohms
Input Sensitivity 1.00 Volts for Full Rated Output
Remote Trigger Voltage 3 - 32 Volts DC at 5 milliamperes or greater
Dimensions (HxWxD) 5.0” x 17.2” x 16.2”
Weight 51 lbs
Power Requirements 115VAC, +/- 3%, 50Hz - 60Hz
1200 watts, maximum
Specifications