Omron HCG-801 - Manual (Page 15)

If the battery cover is accidentally detached,
attach the battery cover as described in the
procedure below.
1. Align the pin of the battery cover with the groove
at the top of battery compartment on the START
button side (front) of the unit ( 1).
2. Align the other pin of the battery cover with the
groove on the other side of the battery
compartment (
2).
While gently pushing the pin already inserted in
the START button side (front), insert the pin
in the groove on the opposite side of the battery
compartment.
NOTE: Do not push the pin in the START
button side of the battery compartment
hard. This could result in damage to the
battery cover.
3. Close the battery cover.
While pressing the battery cover, slide it in the direction of the arrow.
HOW TO ATTACH THE BATTERY COVER
15
2
1
Align pin with
groove
Align pin with
groove
Battery cover
START button side