Olympus 1060 - Manual (Page 44)

44 EN
Viewing the image immediately after shooting [REC VIEW]
x SETUP REC VIEW
Submenu 2 Application
OFF
The image being recorded is not displayed. This allows the user to prepare for the
next shot while following the subject in the monitor after shooting.
ON
The image being recorded is displayed. This allows the user to make a brief check of
the image that was just taken.
Even when set to [ON], you can resume shooting while the image is being displayed.
Selecting the camera sound and its volume [SOUND SETTINGS]
x SETUP SOUND SETTINGS
Submenu 2 Submenu 3 Submenu 4 Application
BEEP
SOUND TYPE 1/2
Selects the operating sound and volume of the
camera buttons (except the shutter button).
VOLUME
OFF (No sound)/
LOW/HIGH
SHUTTER SOUND
SOUND TYPE 1/2/3
Selects the operating sound and volume of the
shutter button.
VOLUME
OFF (No sound)/
LOW/HIGH
8 OFF (No sound)/
LOW/HIGH
— Adjusts the warning sound volume.
q VOLUME OFF (No sound) or
the level of 1-5.
— Adjusts the image playback volume.
To turn off all sounds at once, make the setting from [ j SILENT MODE] (p. 49).