Olympus 1060 - Manual (Page 47)

47 EN
Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions.
Using the alarm [ALARM CLOCK]
x SETUP ALARM CLOCK
When [ X] has not been set, [ALARM CLOCK] is not available.
When [ j SILENT MODE] (p. 49) is set to [ON], the alarm will not sound.
When [DUALTIME] (p. 46) is set to [ON], the alarm is activated at the date and time set in [DUALTIME].
Submenu 2 Submenu 3 Submenu 4 Application
OFF — — The alarm is canceled.
ONE TIME
TIME
(Proceeds to
the time setting
screen
*1 .)
The alarm is activated once according to the selected
time, sound, and volume settings.
SNOOZE *2 OFF/ON
SOUND TYPE 1/2/3
VOLUME LOW/HIGH
DAILY
(Submenus 3 and 4 can be set in the
same way as [ONE TIME].) The alarm is activated daily according to the selected
time, sound, and volume settings.
*1 The setting procedure is identical to that in “Setting the date and time” (p. 13).
*2 In this setting, even if the alarm is stopped once, alarm will be activated every 5 minutes, up to 7 times.
To check the alarm time, press the g/Ebutton while the camera is turned off. The camera displays the
current time (and, if set, the alarm time) on the LCD monitor for approximately three seconds.
To activate the alarm To stop the alarm
After making the detailed settings of [ONE
TIME] or [DAILY], press the o button to
turn off the camera. When the alarm is activated, press any button to
stop the alarm and turn off the camera.
When [SNOOZE] is set to [OFF], the alarm stops
automatically and the camera turns off after one
minute of inactivity.