Sylvania LD320SS1 - Manual (Page 16)

14 14
EN
P
REPARATION
[PC Connection]
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cable as well.
If you connect this unit to your PC, you can use this unit as a PC monitor.
e.g.)
DVI OUT
stereo mini plug
conversion cable
rear of this unit
To HDMI1 To HDMI1
input jack
k only input jack only
HDMI-DVI conversion cable should be with ferrite core.
DV HDMI D DMI- V HDM HDMI-DVI
on ca ver o o cab conversi bl conversion cable
personal computer
The following signals can be displayed:
Format Resolution Refresh rate Format Resolution Refresh rate
VGA 640 x 480 60Hz
WXGA
1,280 x 768 60Hz
SVGA 800 x 600 60Hz
1,360 x 768 60Hz
XGA 1,024 x 768 60Hz
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
 Cable Management g
Keep the cables through this holder to avoid tangle
them.
rear of this unit
 Plug In the AC Power Cord
Make sure that the AC power cord must be plugged
to an AC outlet after all the necessary connections are
completed.
rear of this unit
AC power cord
AC outlet
Caution:
• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of
this range may result in fire or electrical shocks.
Note:
• Each time you plugged in the AC power cord, any operations
will not be performed for a few seconds.
This is not a malfunction.
A9DF1UH_LD320SS1_EN_v1.indd 14 A9DF1UH_LD320SS1_EN_v1.indd 14 2010/01/22 17:12:15 2010/01/22 17:12:15