Onkyo DV-S535 - Manual (Page 8)

8
S VIDEO VIDEO
VIDEO OUTPUT
COAXIAL OPTICAL
R
L
R
L
DIRECT
MONO
(DIRECT)
ACOUSTIC
CONTROL
TV ( )
DIGITAL
OUTPUT
ANALOG OUTPUT
Y P B P R
COMPONENT
VIDEO OUTPUT
Connecting to a TV
Before connecting
• Refer also to the instruction manual of the TV.
• When you connect the DVD Player to the TV, be sure to turn off the
power and unplug both units from the wall outlet before making any
connections.
• Connect the DVD Player to the TV directly. If you connect the DVD
Player to a VCR, TV/VCR combination, or video selector, the playback
picture may be distorted as DVD videos are copy protected.
(Yellow) To video input
To S video input
(White)
L (White)
To audio inputs
TV
• Note that one audio/video connection cable and one S video
connection cable are supplied. To use the audio/video cable for only the
audio connection, leave the yellow plug disconnected.
• Connect the plugs securely. Incomplete
Insert completely
TV
: Signal flow
If you make the S video connection,
leave the yellow plug disconnected.
R (Red)
(Y
ellow)
Connecting to a TV With Component Video Inputs
If the TV or monitor has component video inputs, make this
connection. Connecting to these inputs allows you to enjoy
higher quality picture playback compared to the
connections explained in “Connecting to a TV Without
Component Video Inputs” below.
Notes
• Actual labels for component video inputs may vary depending on
the TV manufacturer (ex. Y/C B /C R , Y/B-Y/R-Y, etc.).
• In some TVs, the color levels of the playback picture may be
reduced slightly or the tint may change. In such a case, adjust the
TV for optimum performance.
Connecting to a TV Without Component Video
Inputs
If the TV or monitor has an S video input, make the S video
connection. The S video connection will provide higher
quality picture playback.
(Red)
If the TV audio input is monaural,
leave the red plug disconnected.
: Signal flow
S video connection cable Stereo audio/video
connection cable
DO NOT connect the
power cord at this time.
Y
To component video inputs
P B
P R
Component video connection cable
(Red) (White)
Stereo audio connection cable
R (Red) L (White)
To audio
inputs