Olympus E-M5 - Manual (Page 61)

61 EN
Other shooting options
2
3D Photography
Take 3D photographs. The results can be viewed on devices that support 3D display.
Images are framed in the monitor. The camera monitor can not be used to view images
in 3D.
1 Rotate the mode dial to
SCN.
2 Select [3D Photo] and press
Q.
• The subject is displayed in the monitor.
3 Press the shutter button to take the first shot
and keep the shutter button in this position.
• Focus and exposure are locked at the values for the
first shot.
• If you are using a 3D lens, shooting is completed the
first time the shutter button is pressed.
Cancel
Line up the image.
4 Move the camera horizontally without rotation until the first shot is
superimposed on your subject. The camera will take the second shot
automatically.
• Do not adjust focus or zoom.
• If the camera does not take the second shot automatically or if you released the
shutter button before the second shot was taken, press the shutter button all the way
down again.
5 The two images are combined automatically.
• If the camera displays the message [3D photo was not created.], take the photograph
again. The two shots are saved to separate files.
# Cautions
• The quality of the display in the monitor drops slightly.
• Adjusting zoom after the first shot is taken cancels the first shot.
• The camera focuses on the subject in the center focus point only.
• Image size is fixed at 1920 × 1080.
• Image size is fixed at 1824 × 1024 SF when a 3D lens is used.
• Manual focus lenses can not be used.
• Depending on the lens and camera settings, the 3D effect may not be visible.
• The camera will not go to sleep during 3D photography.
• RAW photography is not available.
• Frame coverage is not 100%.
$ Notes
• To retake the photograph after taking the first shot, press
D. Press Q to save the first
shot and exit without recording a 3D image.