W# custom, X k /color/wb, Customizing camera settings – Olympus E-M5 User Manual
Page 89
89
EN
Customizing camera settings
10
Option
Description
g
ISO-Auto
Choose the shooting modes in which [Auto] ISO sensitivity
is available.
[P/A/S]: Auto ISO sensitivity selection is available in all modes
except M. ISO sensitivity is fixed at ISO 200 in mode M.
[All]: Auto ISO sensitivity selection is available in all modes.
—
BULB/TIME Timer
Choose the maximum exposure for bulb and time
photography.
—
Live BULB
Choose the display interval during shooting. Some
restrictions apply. The frequency drops at high ISO
sensitivities. Choose [Off] to disable the display. Tap the
monitor or press the shutter button halfway to refresh the
display.
—
Live TIME
—
Anti-shock z
Choose the delay between the shutter button being
pressed and the shutter being released. This diminishes
camera shake caused by vibrations.This feature is
useful in situations such as microscope photography and
astrophotography. It is also useful for sequential shooting
(P. 56) and self timer photography (P. 56).
—
W
#Custom
MENU
c
W
Option
Description
g
# X-Sync.
Choose the shutter speed used when the flash fires.
109
# Slow Limit
Choose the slowest shutter speed available when a flash
is used.
109
w+F
When set to [On], it will be added to the exposure
compensation value and flash intensity control will be
performed.
47, 69
X K/Color/WB
MENU
c
X
Option
Description
g
Noise Reduct.
This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is only performed at slow shutter
speeds.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• Noise reduction requires about twice the time needed to
record the image.
• Noise reduction turns off automatically during sequential
shooting.
• This function may not work effectively with some shooting
conditions or subjects.
59
Noise Filter
Choose the amount of noise reduction performed at high
ISO sensitivities.
—
WB
Choose the white balance mode.
50
All >
[All Set]: Use the same white balance compensation in all
modes except [CWB].
[All Reset]: Set white balance compensation for all modes
except [CWB] to 0.
—
V Exp/p/ISO
MENU
c
V