Onkyo AV Receiver TX-NR509 - Manual (Page 39)

39
En
Advanced Operations
Advanced Setup
Note
The on-screen setup menus are displayed when:
• There is no video input, or
• The video input is 480p, 576p, 720p, 1080i, or 1080p.
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver’s
various settings. Settings are organized into 12 categories
on the menu.
Carry out the settings by using the on-screen display.
Note
• This procedure can also be performed on the AV receiver by
using SETUP, arrow buttons, and ENTER.
• During Audyssey 2EQ ® Room Correction and Speaker Setup,
messages, etc., that are displayed on the TV screen will appear
in the Display.
On-screen Setup Menus
The on-screen setup menus appear only on a TV that
is connected to the
HDMI OUT. If your TV is
connected to the MONITOR OUT V or the
COMPONENT VIDEO OUT, use the AV receiver’s
display when changing settings.
HDMI Input
(
➔
page 40)
Sp Distance
(
➔
page 42)
Component
(
➔
page 40)
Level Cal
(
➔
page 42)
Digital Audio
(
➔
page 40)
Audio Adjust
(
➔
page 43)
Sp Config
(
➔
page 41)
Source Setup
(
➔
page 44)
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Network Setup
12. Update BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
PORT
Setup Menu
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
PORT
Unit
Left
Center
Right
Surround Right
SurrBack Right
SurrBack Left
Surround Left
Subwoofer
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
PORT
Left
Center
Right
Surround Right
SurrBack Right
SurrBack Left
Surround Left
Subwoofer
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD
PORT
Input Ch (Mux)
Input Ch (Mono)
Panorama
Dimension
Center Width
Dolby EX
Center Image
Listening Angle
Subwoofer
Front
Center
Surround
Surround Back
Surround Back Ch
Crossover
Double Bass
Wireless SB
Wireless SW Audyssey
Dynamic EQ
Reference Level
Dynamic Volume
A/V Sync
Name
Audio Selector
Fixed Mode
Hardware
(
➔
page 46)
Network Setup
(
➔
page 49)
HDMI Setup
(
➔
page 48)
Update
(
➔
page 50)
Common Procedures in Setup Menu
1 Press RECEIVER followed by SETUP.
Tip
• If the main menu doesn’t appear, make sure the appropriate
external input is selected on your TV.
2 Use / to select a menu, and then press ENTER.
3 Use / to select target, and use / to change the
setting.
Press SETUP to close the menu.
Press RETURN to return to the main menu.
Volume OSD
Remote ID
AM/FM Freq Step
Auto Standby
UP-A1 ChargeMode MAC Address
DHCP
IP Address
Subnet Mask
Gateway
DNS Server
Proxy URL
Proxy Port
Network Control
Control Port
HDMI Ctrl (RIHD)
HDMI Through
Audio TV Out
Audio Return Ch
LipSync Version
Receiver
via NET
via USB
Universal Port
via NET
via USB
RETURN SETUP
RECEIVER
ENTER
/ / /
Remote indicator