Change the lantern pattern film, Using the floating aroma candle under bath water – Oregon Scientific WS112 User Manual

Page 5

Advertising
background image

NOTE

NOTE

CHANGE THE LANTERN PATTERN FILM

1. The FLOATING AROMA LANTERN comes with different lantern films. Remove the

packaging before use.

2. Unlock the Candle Light compartment unit. Access is at the bottom of base charger.

To open twist in an anti-clockwise direction.

3. Replace the film carefully.

4. Lock the Candle-light compartment unit by twisting it clockwise.

• Remove all aroma essential oil from the holder before use under water

• It is not recommended to turn on the diffuser function if used under water

USING THE FLOATING AROMA CANDLE UNDER BATH WATER

1. Open water tank stopper attached on both sides of the unit.

2. Turn the Floating Aroma Lantern upside down. Immerse the Floating Aroma Lantern into

water to release the air from the water tank. The unit will submerge after it is properly filled.

3. Turn the Floating Aroma Lantern to the correct orientation before use.

1. Remove all aroma essential oil from the holder before use under water

2. It is not recommended to turn on the diffuser function if used under water

EN

Advertising