Oricom IP800 User Manual
Page 25
ADDITIONAL FEATURES
Page 25 of 31
10
Advanced features
Recall
Your phone comes with different Recall durations. Check with your local service provider if you are not sure which duration to use.
1. Press
the
MENU key.
2.
Select ADVANCED SET and press the OK key.
3.
Select RECALL TIME and press the OK key. The current setting is displayed.
4.
Select the desired Recall durations.
5. Press
the
OK key to confirm.
Pause
1. Press
the
MENU key.
2.
Select ADVANCED SET and press the OK key.
3.
Select PAUSE and press the OK key. The selected pause duration is displayed.
4.
Press UP and DOWN to select the Pause duration.
5. Press
the
OK key to confirm.
PABX
1. Press
the
MENU key.
2.
Select ADVANCED SET and press the OK key.
3.
Select PABX and press the OK key. The current PABX number (if available) will display.
4.
Enter the PABX number to enable this feature. To disable PABX, clear the number.
5. Press
the
OK key to confirm.
Baby call
Baby call allows you to dial out a programmed number by pressing any key on the handset (except the OFF key).
1. Press
the
MENU key.
2.
Select ADVANCED SET and press the OK key.
3.
Select BABY CALL and press the OK key. The current setting is displayed.
4.
Select ON and press the OK key.
5.
Enter or edit the number.
6. Press
the
OK key to confirm. BABY CALL is displayed when you return to standby mode.
To turn off baby call,
1. Press
the
OFF key.
2.
Select OFF and press the OK key.
Visual Message waiting indication (VMWI)
You have to subscribe to a voice message service (eg Telstra Message Bank) from your local service provider to use this feature. When
you receive a voice message,
will appear on the display. When you retrieve your messages the message
will turn off.
You can clear the Voicemail waiting indicator before retrieving all the new voicemail messages. Please note that this will not clear the
voicemail message waiting indicator for Skype voicemail messages.
1. Press
the
MENU key.
2.
Select ADVANCED SET and press the OK key.
3.
Select VMWI and press the OK key.
4.
The prompt “DELETE?” will be shown.
5. Press
the
OK key to confirm.
Note: Your handset must have a link with the base unit in order to use any advanced features mentioned in this section.