Oricom IP800 User Manual

Page 27

Advertising
background image

ADDITIONAL FEATURES

Page 27 of 31

Resetting


You can reset the display, sounds, and other settings of your phone. Refer to the section Default settings.

1. Press

the

MENU key.

2.

Select ADVANCED SET and press the OK key.

3.

Select RESET and press the OK key.

4.

Enter the PIN (The default pin code is 0000).

5. Press

the

OK to confirm.

11

Additional features

Keypad lock


Keypad can be locked to prevent accidental key press. When the keypad is locked, you can still answer an incoming call by pressing
the TALK key. During the call, the keypad is active. When the call is ended, the keypad will be locked again.

L

OCKING AND UNLOCKING THE KEYPAD

1.

Press and hold KEY LOCK during standby. When locked, LOCKED appears on the display.

2.

Press and hold KEY LOCK again to unlock the keypad.



Shortcut for turning handset ringer on/off


You can use this shortcut to turn on/off the handset ringer.

1.

Press and hold the RINGER OFF key.


Message waiting indication


If you have subscribed to the voicemail service from your local service provider and/or from SKYPE,

turns on when you have a new

message in either of your mailboxes. After you’ve listened to all the new messages,

will turn off.


Finding a handset


You can locate the handsets by using this feature.

1.

Press and hold the PAGE key on the base.
















Not ringing?
A handset will not play the paging melody if it is powered off or in mode other than standby mode; however, all the other
handsets will still ring.

NOTE: When a call comes in, your keypad becomes active. When you end the call, your keypad will be locked again.

Note:

appears to indicate the ringer is turned off. The handset will not emit any sound for any incoming call.

Note: All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays PAGING.
If an external call comes in, all the handsets will stop paging, and play the external call melody.

Stop the paging
You can stop the paging by pressing any key on each handset or pressing the PAGING key on the base again.

Advertising