Sylvania SRTD309 - Manual (Page 11)

– 11 – EN
0C28
– 11 –
CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on an another
source (VCR or video camera), use the audio/video
input jacks on the front of the TV/DVD.
Connect the audio/video output
jacks of another source to the
AUDIO L/R and VIDEO jacks of
this TV/DVD. Then press SELECT
until "AUX" appears on the screen.
NOTE:
• When you connect a monaural VCR (another
source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will
output in both L and R channel equally.
AUX
POWER AUDIO L VIDEO R
VIDEO L AUDIO R
[Another source] To the audio
output jacks
Audio/Video
cables
(not supplied)
etc.
To the video
output jack
[Front of the TV/DVD]
[Fig. 6]
CONNECTING TO A STEREO SYSTEM
AUDIO OUT
DC 13.2V
L
R
COAXIAL
ANT. AUDIO OUT
L
R
COAXIAL
To Right (red) and Left (white)
AUDIO OUT jacks
Stereo system
To ANALOG AUDIO INPUT jacks
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the
TV/DVD.
• The monaural sound is output from the stereo system when the TV/DVD is in the TV mode.
[Fig. 7]
TD005.QX33 04.7.30 1:34 PM Page 11