Sylvania SRTD309 - Manual (Page 12)

– 12 – EN
0C28
– 12 –
CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER
(for DVD)
If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD out-
puts a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to
a receiver with Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful
and high-quality surround sound as enjoyed in movie theaters.
Use audio coaxial digital cables available at retail for the audio connections.
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the
setup mode. (See page 27 to set DOLBY DIGITAL to ON.)
• Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output
in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also
damage the speakers.
AUDIO OUT
DC 13.2V
L
R
COAXIAL
ANT. AUDIO OUT
L
R
COAXIAL
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
To COAXIAL DIGITAL
AUDIO INPUT jack
Receiver with
Dolby Digital decoder
[Fig. 9]
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (See page 27 to set DOLBY
DIGITAL to OFF.)
AUDIO OUT
DC 13.2V
L
R
COAXIAL
ANT. AUDIO OUT
L
R
COAXIAL
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL
AUDIO INPUT jack To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 8]
TD005.QX33 04.7.30 1:34 PM Page 12