Opticon OPL972X - Manual (Page 20)

20 - OPTICON OPL972X/CRD972X
2.6 COMMUNICATION
2.6.1 RS32 INTERFACE
Check if the chosen COM port matches the COM
port in the user’s application program.
Check if the baud rate of the cradle and the host
computer match.
2.6.2 USB INTERFACE
Check if the defined COM port in Windows
matches the COM port in the user’s application
program.
Check if the baud rate of the cradle and the host
computer match.
2.6.3 MULTICRADLE SINGLE
COMMUNICATION
When using the multicradle type with single
communication, note that the model has only one
slot that supports communication. To transmit data
to the host, place the bar code data collector in the
right slot of the cradle seen from the front side.
2.6.4 BLUETOOTH BAR CODE DATA
COLLECTOR
The Bluetooth bar code data collector model will
communicate with the SIG certified Bluetooth
devices. The choice in profile (SPP or DUN) that
needs to be supported must be set in the user’s
application program.