Olympia/Luggage America 65 - Manual (Page 34)


CHAIN ADJUSTMENT
Check the chain adjustment after the first two hours of use.
Readjust if it has more than 1.25” flex.
Adjusting the Chain
To Tighten Chain:
1. Loosen all four bolts under engine mount plate.
2. Slide engine back until chain is adjusted to the desired tension
(0.8” to 1.2” of slack).
To Loosen Chain:
1. Loosen all four bolts under engine mount plate.
2. Push engine forward, toward the seat.
0~0 mm
(0.~. in)