Opticon 25-ULGPMU01-01 - Manual (Page 6)

Manual No. 25-ULGPMU01-01 Series LGP Handheld CCD Scanner
Page 6
Reset All Defaults – Keyboard Wedge Interface
Our scanners are shipped with factory default settings that represent the settings most commonly used by our customers. In most
applications, the scanner will work right out of the box without any need for additional programming. At any time you can return
the scanner to the factory default settings. First scan the Start Program Menu bar code below, then scan the “Reset all Defaults”
programming bar code, and then the End Program Menu bar.
NOTE: (
%
) A pointing finger indicates default settings throughout the following menus.
ZZ
Start
Program Menu
[[
UB
Reset All Defaults
(AT Wedge)
VC
%
ZZ
End
Program Menu
[[
Computer Type Selection (for Keyboard Wedge only)
The Keyboard Wedge interface scanner is designed to operate with an IBM personal computers and compatibles along with a
Macintosh PC's. Select the host computer type from the menu below.
NOTE: If the scanner has not been set to the correct host computer, the scanner may display random characters on the screen after
reading a bar code label.
ZZ
Start
Program Menu
[[
UA IBM PC/XT
VB
UB
IBM AT &
compatibles
VC
%
UD HP Vectra
VE
UM Macintosh
VN
ZZ
End
Program Menu
[[