Opticon 25-ULGPMU01-01 - Manual (Page 7)

Manual No. 25-ULGPMU01-01 Series LGP Handheld CCD Scanner
Page 7
Keyboard Wedge and USB options
With Keyboard: Use this mode in case a keyboard is connected to the PC wedge Y-cable. The Wedge is only listening in case the
computer is booting or the wedge is idle.
Without Keyboard: Use this mode in case no keyboard is connected to the PC wedge Y- cable. In some cases, this mode is
required when a PC USB keyboard is connected. If this option is enable, the computer detects the wedge as a keyboard. If the
computer reports a keyboard error or in case no data is displayed, try this option. It is required to power OFF the PC, wait 10
seconds and power ON the PC.
NOTE: Do not enable ‘without keyboard’ option when a keyboard is connected to the Y cable. The ‘without keyboard’ option is
only supported for PC/AT wedges.
ZZ
Start
Program Menu
[[
KM With keyboard
LN
%
KL Without keyboard
LM
ZZ
End
Program Menu
[[