Osd menu controls, Navigating the osd, Setup and operation – Optoma Optoma EP771 User Manual

Page 25

Advertising
background image

Setup and Operation

OSD Menu Controls

The projector has an OSD that lets you make image adjustments and change various settings.

Navigating the OSD

You can use the remote control cursor buttons or the buttons on the top of the projector to navigate
and make changes to the OSD. The following illustration shows the corresponding buttons on the re-
mote control and on the projector.

1

4

3

6

2 5

1
2

3

4

5

6

1. To open the OSD, press the Menu button.

2. There are six menus. Press the cursor

button to move through the menus.

3. Press

the

cursor button to move up and

down in a menu.

4. Press

to change values for settings, and

then press Enter or to confirm the new set-

ting.

5. Press

Menu to close the OSD or leave a sub-

menu.

Note:

Depending on the video source not all items in the OSD are available. For example, the Horizon-
tal/Vertical Position
items in the Setup menu can only be modified when connected to a PC. Items
that are not available cannot be accessed and are grayed out.

25

Advertising