Resetting the lamp, Appendices – Optoma Optoma EP771 User Manual
Page 42
Advertising
Appendices
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
Press the Menu button to open
the Image menu.
2.
Press the cursor
button to
move to the Management menu.
3.
Press the cursor
button to
move down to Status.
4.
Press the cursor or Enter
button to enter Status menu
5.
Press the cursor
button to
move down to Lamp Hour Reset.
Press the cursor or Enter
button.
A message screen appears.
6.
Press the cursor buttons in this
order: ; ; ; .
The Status menu appears again
showing the Lamp Hours reset to
zero.
42
Advertising